Skip to main content

News > Winter feeding – The importance of silage analysis

CAFRE

Winter feeding – The importance of silage analysis

October 16, 2024

Are you preparing to open new silage stocks for the upcoming livestock housing period? CAFRE, Beef and Sheep Adviser, Adam Jones, highlights the importance of conducting a silage analysis.

Farm businesses often spend a significant amount of time, money and effort getting silage ensiled correctly. However, with all this effort we often fail to get an understanding of its quality. To keep input costs to a minimum it is crucial that silage is analysed to understand if supplementary feeding is required.

Sampling silage

It is important that silage is tested every four weeks to ensure that any changes in quality are accounted for. Simply guessing what the silage quality is may result in under or over-feeding. This can influence livestock health, fertility and performance, adding cost to the enterprise.

To ensure the results are accurate, it is important to submit a sample that is representative of what you’re feeding to stock. A pit of silage can be tested before it is opened using a corer. Alternatively, take a sample from the face of the clamp once the pit is opened.

To take a sample from the face of the clamp work across the face in a ‘W’ shape taking 10-12 samples. Ensure the samples are taken 20cm back from the face. This will avoid sampling silage that has been exposed to rain or sun, which can affect the dry matter reading.

Samples should not be taken from deteriorated areas or from the top 50cm of the clamp. Take a handful of silage from each testing spot, combine in a clean bucket and mix well.  Empty the sample onto clean ground and mix again before splitting and filling sample bags to the correct level.

For baled silage take samples from five bales and thoroughly mix the samples together. Reseal holes to prevent deterioration of the bale.

Express all the air from the sample bag, to prevent any deterioration of the sample. The sample is now ready to be analysed. This can either be completed using on farm testing machines or posted to a certified lab for testing. If the sample is being posted send away early in the week. This will ensure its not sitting at a delivery depot for a long period which will degrade the sample.

Silage analysis results

The silage analysis report will cover several parameters. Different groups of livestock will require different levels of silage quality. The dry matter (DM) measures how much of the silage isn’t water. If the silage is less than 25% DM, then it can be difficult for livestock to eat enough to meet their requirements. The digestibility value (D value) measures how digestible the silage is. This is often affected by cutting date, with younger grass having a higher D value. Metabolisable energy (ME) shows the level of usable energy that the silage provides to livestock when fed. This along with crude protein (CP) levels are an important consideration for growing stock.

Ash content is also a parameter to consider as it gives the level of mineral and trace elements in the silage. Silage with an ash content of 10% or above would indicate soil contamination. This can affect feed intakes, livestock health and performance. 

If you require additional information or help understanding your silage analysis results, please contact your CAFRE Adviser through your local DAERA Direct office.